HOBBICO NOV NOVAK NOVM3234 3234 Eiger ESC/Rock Star Crawling Motor Combo 45T AX90018 NOVC5304

Sie haben keinen Standort angegeben
Es wurde kein Fachhändler gefunden

Artikeldetails

HOBBICO NOV NOVAK NOVM3234 3234 Eiger ESC/Rock Star Crawling Motor Combo 45T AX90018 NOVC5304

Artikelbeschreibung:

 This is the Novak Eiger 2S/3S Brushless and Brushed Electronic Speed Control and the Rockstar 45 Turn Brushed Motor for Crawling Applications. FEATURES: ESC NOVM1835; Additional motor wire to connect a 10.5 turn or higher brushless motor for use with 2S LiPo packs May be used for brushless class racing, crawling when used with a Novak crawling brushless motor, or bashing around Compatible with 2-3S LiPo cells and 4-9 cell NiMH batteries 2S only with brushless motor Heavy duty 2-amp BEC Three throttle modes; Rock Crawl Mode with adjustable drag brake power Standard/Basher Mode for normal FWD/BRK Robotic or Servo Mode for FWD/REV operation only Four adjustable parameters; Brake Power/Throttle Mode 5 settings Dead Band 5 settings Drive Frequency 5 settings Voltage Cut-Off One-Touch programming interface with four multi-colored status LEDs 6V output for cooling fan or other options such as running lights Temperature monitoring allows user to check ESC operating temperature at any time Thermal overload protection to prevent overheating Water-resistant case with silicone gasket seal One touch setup RoHS compliant One year limited warranty on ESC through Novak beginning at date of purchase Motor NOVC3547; Designed for crawler vehicles that require precise movement control High number of turns for excellent torque and long run times Rebuildable with easily accessible commutator and replaceable brushes and springs Stand-up brush design High-strength ferrite magnet Dual ball bearings Direct solder wiring tabs for flexible soldering options INCLUDES: Novak Eiger ESC with Tamiya Type Battery Connector, Gold Plated Bullet Motor Plugs, Mounting Tape, Power Cap, Wires, Heat Sink, Rock Star 45 Turn Brushed Motor and Instruction Manual REQUIRES: Pinion gear of modeler's choice Installing in vehicle and connecting to battery and receiver SPECS: ESC; Input Cells: 2-3S LiPo or 4-9 NiMH Size: 1.15 x 0.95 x 0.75" 29.0 x 24.3 x 20mm Weight: 0.75oz. 21.31g without wires On-Resistance: 0.0013 ohms Motor Limit: 2S Brushed, 20T or higher, any 380 size 3S Brushed, 35T, any 380 size 2S Brushless, 10.5T or higher, any 380 size BEC: 6V DC/2A Wire Size: 14G Super-Flex Copper-Strand Silicone Wire Motor; Motor Size: 2.07 x 1.42" 52.7 x 36.1mm Shaft Diameter: 0.125" 3.2mm accepts all 1/8" pinion gears Bearing: Standard 3/8" x 1/8" Motor Weight: 5.97oz. 169g jxs 02/23/12 ir/jxs   BOX DIMENSIONS: 3.88" W. X 1.88" H. X 5.25" L. BOX WEIGHT: .66 LBS. 

HOBBICO

Frage zum Artikel

{[ errors.first('Empfänger') ]}
{[ errors.first('Absender') ]}
{[ errors.first('E-Mail Adresse') ]}
{[ errors.first('Frage') ]}
exkl. MwSt.
Zustand: Neu
in
Sie haben keinen Standort angegeben
Es wurde kein Fachhändler gefunden