HOBBICO NOV NOVAK NOVM1836 1836 Eiger Pro 2S/3S Crawling Brushed ESC/BEC NOVC5304

HOBBICO NOV NOVAK NOVM1836 1836 Eiger Pro 2S/3S Crawling Brushed ESC/BEC NOVC5304

Artikelbeschreibung:

 This is the Novak Eiger Pro 2S/3S Electronic Speed Control for Brushless or Brushed Crawler Motors. FEATURES: #5463 3A BEC module allows 3S LiPo battery usage Additional motor wire to connect a 10.5 turn or higher brushless motor for use with 2S LiPo packs May be used for brushless class racing, crawling when used with a Novak crawling brushless motor, or bashing around Brushless mode includes on-board programming to customize and fine- tune the feel of the ESC Compatible with 2-3S LiPo cells and 4-9 cell NiMH batteries 2S only with brushless motor Three throttle modes; Rock Crawl Mode with adjustable drag brake power Standard/Basher Mode for normal FWD/BRK Robotic or Servo Mode for FWD/REV operation only Four adjustable parameters; Brake Power/Throttle Mode 5 settings Dead Band 5 settings Drive Frequency 5 settings Voltage Cut-Off Non-crawling basher mode can be used in any 1/10, 1/12, 1/16, or 1/18 scale application with a 20 turn or higher brushed motor One-Touch programming interface with four multi-colored status LEDs 6V output for cooling fan or other options such as running lights Temperature monitoring allows user to check ESC operating temperature at any time Thermal overload protection to prevent overheating Water-resistant case with silicone gasket seal One touch setup RoHS compliant One year limited warranty through Novak beginning at date of purchase INCLUDES: Novak Eiger Pro ESC with Gold Plated Bullet Motor Plugs, Mounting Tape, Power Cap, Wires, Heat Sink, 3A BEC Module, Instruction Manual REQUIRES: Installing in vehicle and connecting to battery, receiver and motor Battery connector to match selected battery SPECS: Motor Limit: 2S Brushed, 20T or higher, any 380 size 3S Brushed, 20T, any 380 size 2S Brushless, 10.5T or higher, any 380 size Input Cells: 2-3S LiPo or 4-9 NiMH Size: 1.15 x 0.95 x 0.75" 29.0 x 24.3 x 20mm Weight: 0.75oz. 21.31g without wires On-Resistance: 0.00036 ohms BEC: 6V DC/3A Wire Size: 14G Super-Flex Copper-Strand Silicone Wire jxs 03/26/12 ir/jxs updt jxs 02/04/14   BOX DIMENSIONS: 3.88" W. X 1.88" H. X 5.38" L. BOX WEIGHT: .28 LBS. 

{[ field.label ]}
{[ data.manufacturerTitle ]} {[data.modelTitle]} - {[data.typeTitle]} - {[data.power]} - {[data.capacity]} - {[data.construction]} -
{[ kba ]}
-
{[key]}: {[value]}
-

Beim Abspeichern Ihrer Bewertung ist ein Fehler aufgetreten. Versuchen Sie es später nochmal.

{[ errorMessage ]}

Vielen Dank für Ihre Bewertung.

Bewertungen
Zu diesen Artikel gibt es noch keine Bewertungen.
von 5 Sternen
{[ review.userAlias ]}
{[ ratings.formatDate(review.createdAt) ]}
{[ review.text ]}
Mehr anzeigen
Weniger anzeigen
Artikeldetails

HOBBICO NOV NOVAK NOVM1836 1836 Eiger Pro 2S/3S Crawling Brushed ESC/BEC NOVC5304

Artikelbeschreibung:

 This is the Novak Eiger Pro 2S/3S Electronic Speed Control for Brushless or Brushed Crawler Motors. FEATURES: #5463 3A BEC module allows 3S LiPo battery usage Additional motor wire to connect a 10.5 turn or higher brushless motor for use with 2S LiPo packs May be used for brushless class racing, crawling when used with a Novak crawling brushless motor, or bashing around Brushless mode includes on-board programming to customize and fine- tune the feel of the ESC Compatible with 2-3S LiPo cells and 4-9 cell NiMH batteries 2S only with brushless motor Three throttle modes; Rock Crawl Mode with adjustable drag brake power Standard/Basher Mode for normal FWD/BRK Robotic or Servo Mode for FWD/REV operation only Four adjustable parameters; Brake Power/Throttle Mode 5 settings Dead Band 5 settings Drive Frequency 5 settings Voltage Cut-Off Non-crawling basher mode can be used in any 1/10, 1/12, 1/16, or 1/18 scale application with a 20 turn or higher brushed motor One-Touch programming interface with four multi-colored status LEDs 6V output for cooling fan or other options such as running lights Temperature monitoring allows user to check ESC operating temperature at any time Thermal overload protection to prevent overheating Water-resistant case with silicone gasket seal One touch setup RoHS compliant One year limited warranty through Novak beginning at date of purchase INCLUDES: Novak Eiger Pro ESC with Gold Plated Bullet Motor Plugs, Mounting Tape, Power Cap, Wires, Heat Sink, 3A BEC Module, Instruction Manual REQUIRES: Installing in vehicle and connecting to battery, receiver and motor Battery connector to match selected battery SPECS: Motor Limit: 2S Brushed, 20T or higher, any 380 size 3S Brushed, 20T, any 380 size 2S Brushless, 10.5T or higher, any 380 size Input Cells: 2-3S LiPo or 4-9 NiMH Size: 1.15 x 0.95 x 0.75" 29.0 x 24.3 x 20mm Weight: 0.75oz. 21.31g without wires On-Resistance: 0.00036 ohms BEC: 6V DC/3A Wire Size: 14G Super-Flex Copper-Strand Silicone Wire jxs 03/26/12 ir/jxs updt jxs 02/04/14   BOX DIMENSIONS: 3.88" W. X 1.88" H. X 5.38" L. BOX WEIGHT: .28 LBS. 

HOBBICO
Passende Fahrzeuge
{[ field.label ]}
{[ data.manufacturerTitle ]} {[data.modelTitle]} - {[data.typeTitle]} - {[data.power]} - {[data.capacity]} - {[data.construction]} -
{[ kba ]}
-
{[key]}: {[value]}
-
Vergleichsnummern

Bewertungen

Beim Abspeichern Ihrer Bewertung ist ein Fehler aufgetreten. Versuchen Sie es später nochmal.

{[ errorMessage ]}

Vielen Dank für Ihre Bewertung.

Bewertungen
Zu diesen Artikel gibt es noch keine Bewertungen.
von 5 Sternen
{[ review.userAlias ]}
{[ ratings.formatDate(review.createdAt) ]}
{[ review.text ]}
Mehr anzeigen
Weniger anzeigen
Details
Dateien

HOBBICO

Frage zum Artikel

{[ errorMessage ]}
{[ errorMessage ]}
{[ errorMessage ]}
{[ errorMessage ]}
exkl. MwSt.
Zustand: Neu
in