HOBBICO NOV NOVAK NOVC3259 3259 Crusher Brushless Rock Crawler System 21.5T AX90018

Sie haben keinen Standort angegeben
Es wurde kein Fachhändler gefunden

Artikeldetails

HOBBICO NOV NOVAK NOVC3259 3259 Crusher Brushless Rock Crawler System 21.5T AX90018

Artikelbeschreibung:

 This is the Crusher Brushless 2S-4S Electronic Speed Control and 21.5 Turn Ballistic Brushless Motor from Novak. FEATURES: ESC NOVC1833; Rugged performance for 2S-4S rock crawling, rock racing, trail hauling, short course, and non-racing "go fast" setups Compatible with 540 and 550-size sensored brushless motors Power Hill/Hold Brakes for extreme holding power during crawling Auto-detect driving profile - crawling and extreme sport Dynamic Timing Advance for increased RPM Novak X-Drive provides enhanced throttle response, smooth power delivery, higher top speeds, and cooler operating temperatures Novak Super Tuner firmware for on-board programming Drive Tuning: RPM Boost Timing 2S, Drive Frequency, Minimum Drive extreme sport mode only Brake Tuning: Brake Frequency, Power Hill/Hold Brakes, Minimum Brake Additional Tuning: Dead Band, Voltage Cutoff, Motor Rotation 5A BEC for today's high powered servos On-board diagnostic temperature monitoring, and thermal overload protection One-Touch Set-Up for quick transmitter setup Gold plated wiring tabs for flexible soldering options Ballistic 21.5T Brushless Motor NOVC3619 Completely rebuildable allowing upgrades or replacement of various parts Easy to adjust timing assembly Meets ROAR and IFMAR specifications Oversized front bearing 1/2 x 3/16" 12.7 x 4.8mm for increased load handling and bearing life 12.3mm nickel-plated sintered neodymium rotor for maximum performance in high-temperature conditions 0.125" 3.2mm pinion shaft accepts all existing pinion gears Sensor-based for excellent torque and low-speed driveability Color-coded hand wound stator identifies number of motor winds Heavy duty solder tabs One year limited warranty on both components through Novak beginning at date of purchase INCLUDES: Crusher Brushless 2S-4S ESC, with Cooling Fan, Heat Sink, 14G Power Wires, Instructions Ballistic Spec Brushless 21.5 Turn Motor with Sensor Wire SPECS: ESC; Motor Type: Sensored Brushless Motor Limit: Brushless 2S: 6.5-turn 540-size 13.5T Crawler; 4.5T 550-size Brushless 3S: 13.5-turn 540-size 18.5T Crawler; 6.5T 550-size Brushless 4S: 13.5-turn 540-size 18.5T Crawler; 7.5T 550-size Fwd/Brk/Rev: F/Drag Brake/R, F/B/R with non-crawling motor Input Cells: 2-4S LiPo, 4-14 NiMH LiPo recommended for performance setups, and when using RPM boost timing BEC: 6.0V/5.0 amps Dimensions: 1.16 x 1.47 x 0.96" 29.5 x 37.3 x 24.4mm Weight: 1.42oz. 40.4g On Resistance: 0.00040 ohms @ 25°C trans temp brushless Wire Size: 14G Super-Flex Copper-Strand Silicone Wire 21.5 Turn Motor Watts: 85 Kv: 1,350 RPM/volt unloaded Sensor Harness Length: 9" 230mm Motor Size: 2.07 x 1.41" 52.6 x 35.8mm 540 size Motor Weight: 6.6oz 187g Shaft Diameter: 0.125" 3.2mm jxs 09/17/13 ir/jxs   BOX DIMENSIONS: 5.25" W. X 1.88" H. X 7.63" L. BOX WEIGHT: .85 LBS. 

HOBBICO

Frage zum Artikel

{[ errors.first('Empfänger') ]}
{[ errors.first('Absender') ]}
{[ errors.first('E-Mail Adresse') ]}
{[ errors.first('Frage') ]}
exkl. MwSt.
Zustand: Neu
in
Sie haben keinen Standort angegeben
Es wurde kein Fachhändler gefunden