HOBBICO NOV NOVAK NOVC3231 3231 Eiger ESC/Terra Claw Crawling Motor Combo 35T AX90018 NOVC5304

Artikelbeschreibung:

 This is the Novak Eiger 2S/3S Brushless and Brushed Electronic Speed Control and 35 Turn Terra Claw Brushed Motor for Crawler Applications. FEATURES: ESC NOVM1835; Additional motor wire to connect a 10.5 turn or higher brushless motor for use with 2S LiPo packs Compatible with 2-3S LiPo cells and 4-9 cell NiMH batteries 2S only with brushless motor Heavy duty 2-amp BEC Three throttle modes; Rock Crawl Mode with adjustable drag brake power Standard/Basher Mode for normal FWD/BRK Robotic or Servo Mode for FWD/REV operation only Four adjustable parameters; Brake Power/Throttle Mode 5 settings Dead Band 5 settings Drive Frequency 5 settings Voltage Cut-Off One-Touch programming interface with four multi-colored status LEDs 6V output for cooling fan or other options such as running lights Temperature monitoring allows user to check ESC operating temperature at any time Thermal overload protection to prevent overheating Water-resistant case with silicone gasket seal One touch setup RoHS compliant 35 Turn Terra Claw Brushed Motor NOVC3535: Ideal motor upgrade for RTR crawlers Provides a good balance of speed and torque and is best suited for lighter weight crawling applications Closed endbell design Direct Solder Wiring Tabs One year limited warranty on both components through Novak beginning at date of purchase INCLUDES: Novak Eiger ESC with Tamiya Type Battery Connector, Gold Plated Bullet Motor Plugs, Mounting Tape, Power Cap, Wires, Heat Sink, and 35 Turn Terra Claw Motor and Instruction Manual REQUIRES: Installing in vehicle and connecting to battery and receiver SPECS: ESC; Input Cells: 2-3S LiPo or 4-9 NiMH Size: 1.15 x 0.95 x 0.75" 29.0 x 24.3 x 20mm Weight: 0.75oz. 21.31g without wires On-Resistance: 0.0013 ohms Motor Limit: 2S Brushed, 20T or higher, any 380 size 3S Brushed, 35T, any 380 size 2S Brushless, 10.5T or higher, any 380 size BEC: 6V DC/2A Wire Size: 14G Super-Flex Copper-Strand Silicone Wire Motor; Turns: 35 Input Voltage: 2S LiPo Shaft Size: 1/8" Dimensions 540 size: 2.08 x 1.41" 52.8 x 35.8mm Weight: 5.8oz 164g jxs 10/04/12 ir/jxs   BOX DIMENSIONS: 3.88" W. X 1.88" H. X 5.25" L. BOX WEIGHT: .64 LBS.